home *** CD-ROM | disk | FTP | other *** search
- Path: news.enteract.com!usenet
- From: midas@enteract.com
- Newsgroups: comp.dcom.isdn,comp.dcom.modems
- Subject: Re: Courier V.Everything upgrade?
- Date: 21 Mar 1996 00:04:16 GMT
- Organization: EnterAct, L.L.C.
- Message-ID: <4iq6e0$bgg@eve.enteract.com>
- References: <4icrri$nfi@pyrtech.mis.pyramid.com> <4ii991$c5e@eve.enteract.com> <fgoldstein.317.0016468B@bbn.com> <314F8D40.1727@ptd.net> <314F92D0.73B7@ptd.net> <thompson.1292.0058C14D@robin.tezcat.com>
- Reply-To: midas@enteract.com
- NNTP-Posting-Host: midas.enteract.com
- X-Newsreader: IBM NewsReader/2 v1.2.5
-
- In <thompson.1292.0058C14D@robin.tezcat.com>, thompson@robin.tezcat.com (Bob Thompson) writes:
- >In article <314F92D0.73B7@ptd.net> Greg Reno <greno@ptd.net> writes:
- >
- >>> So, how do I contact USR for the update? Is there a 1-800 number? Also, what
- >>is the date of the
- >>> latest code? The files I saw at the ftp site and on the BBS are older than
- >>what I currently have
- >>> (7/95 I think).
- >>>
- >>> Thanx,
- >>>
- >>> Greg
- >
- >>Actually, I was looking for the above info in regard to the USR Courier
- >>V.Everything modem. I just noticed the header was re: I-Modem
- >
- >The upgrade is available, immediatly, via their BBS. Just follow the
- >instructions.
-
- Actually, the instructions aren't very obvious, by design <G>>
-
- If you have your menus turned off, you'll never even see it. You have to
- type 336 at the Main Board Command prompt. Then follow the instructions
- from there.
-
- At this point in time the I-Modem code isn't available via the door. If
- that changes in the next few days I'll make sure I post a message here
- with that info. But as of now, the only code available is the
- V.Everything and the Sporster DSVD flash code.
-
-